‘Dynanet’ Telecoms – ‘Rampdown’ notice

Phased Discontinuation of Production – 31st May 2019 – 31st January 2020

The production of the ‘Dynanet’ family of PDH Transmission telecoms products, first introduced by Nokia over 20 years ago, and continued in recent years by DNWP, is finally being ended.

This product range has well served Public Operator and Private Network Customers across the Telecoms, Utilities, Transport and Public Safety markets with high availability mission critical infrastructure, and indeed some networks are continuing to provide good operational service. 

Essentially almost all the old equipment items, with a very few exceptions such as the TPS64, are being completely discontinued in a phased way according to these milestones, which have already commended:

31st May 2019 – DM8 Multiplexers, DF2-8 Optical Terminals, RPSA

31st October 2019 – DM2 Multiplexers, Subs/Exch & VF Cards, DN2 IU2, Service Terminals, V.28/V.11 DIU

31st January 2020 – DB2, DN2 CU & BPU, G.703 & V.110, DIU, Ethernet I/F, Ring Gen, NDM 19” Subrack, NDA

@YellowsBestLtd satisfies customer product sourcing requirements for current and ‘legacy’ equipment technologies.

Should you wish to read the full ‘ramp-down’ notice and know more about obtaining equipment before it is no longer available, then please get in touch.

Nokia ‘Dynanet’ Telecoms – Stock disposal

‘Last chance’ for spares!

The Nokia ‘Dynanet’ family of PDH Transmission telecoms products has served customers well for the last 20+ years, and indeed some networks continue providing good operational service. 

DM2
Dynanet Subtrack

@YellowsBestLtd has supported requirements to maintain these networks by supplying various spare part items from refurbished and surplus stocks in perfectly working order.

However, demand has recently reduced and warehouse space is needed, so now the time has come to recycle / dispose of a large proportion of the remaining equipment. Consequently, there remains a short-term opportunity to obtain any items still required to maintain existing deployed infrastructure, before the products are gone.

Here is a stock list of the main items currently available, though there may be a few additional parts that can be supplied. Hence, please check and if you do have any requirements, please let us know – before it’s too late! We look forward to hearing from you.

Part  NumberDescription
24204TPSO H/W Module
CC 24002DB2 Branching Unit, B2 2×2 Mb/s 75 ohm
CC 24011DB2 2 Mb/s Switching Unit, X2 75 ohm
CC 24101DN2 Interface Unit (IU2) 2×2 Mb/s 75 ohm
CC 24111DN2 Control Unit (CU) 75 ohm
CF 24186DN2 19″ Subrack
CF 24186.09DN2 Subrack 19″, grey-L91 EMC
CG 24170DN2 Bus Power Unit (BPU)
CG 24171Extended DN2 Bus Power Unit (EBPU)
CU 24013Data Interface Unit (DIU) 2M, nx64k: G.703/704, 75 ohm
T30506.0917-slot DYNANET Subrack
T30851.02Subrack Power Adapter (SPA)
T37870.01NDM ACM2 19in 17-slot subrack
T37871.01NDM DN2 19″ 17-Slot Subrack
T37882.01NDM DC Unit (NDUe)
T37882.02NDM DC Unit (NDUe)
T37885.01NDM Ring Generator
T37889.01NDM Backup Unit (NBU)
T65520.01ACL2 RM DC Power Gen
T65580.01ACL2i PF GEN Line Terminal Card
TA 21513Optical Line Terminal Repeater 2-8 M, 1300 nm LED MM/SM
TA 21516Optical Line Terminal Repeater 2-8 M, 1300 nm LASER SM
TC 21101DM34 Mux Card
TC 21301DM8 Multiplex Equipment, 75 ohm
TC 21705Supervisory Substation
TC 21710.01TMS Adapter
TG 21261Ring Generator 25HZ 15W
TU 21122.5Data Interface Unit (DIU) 48..64k V.11 10ch
TU 21124Data Interface Unit (DIU) NX64k V.11/V.35/X.21 2CH
TU 21124.05Data Interface Unit (DIU)
TU 21125Data Interface Unit (DIU) 48..64k with sync, X.21
TU 21205Channel Unit SUB/SUB
TU 21206Channel Unit SUB/SUB
TU 21215Channel Unit SUB/EXCH
TU 21216Channel Unit SUB/EXCH
TU 21234.20Channel Unit E&M/VF-P, 10 CH, 20 E&M CH
TU 21236.10Channel Unit (CU) 8ch E&M/uP: 2xe&m/vf
TU 21255.01Channel Switch, 4 PORT
TV 21640.08Power Interface Adapter DC

Keeping Customers Operational – ‘telling’ not ‘selling’

@YellowsBestLtd our mission is to provide our Customers with Management Services and Solutions so their infrastructure networks continue to serve and perform – “Keeping Customers Operational

Needs vary from the launch of the latest IT and Telecoms technologies through to the support of well-established legacy systems.

Given that each organisation is unique, both in its business practices and deployed infrastructure, then we find that its best to take a flexible approach and provide tailored services to suit exacting demands.

Our no-cost and no-obligation Customer consultation is all about finding out needs, regardless of technology or manufacturer, and then sourcing the required solution(s), which may mean seeking out difficult to obtain products or requiring the supply of specialist services.  So in essence, it’s not about us ‘selling’ them something we have, but rather our clients ‘telling’ us what to provide. Making it easier and more convenient for busy procurement and operational teams,  saving them effort, time and cost.

We’re always keen to see how we can enhance our range of #business services, increase the #enterprise infrastructure we support and expand our mix of #systems solutions to supply the required #technologies and products for our customers.

Please help us understand what services would be of interest to you to  support your systems requirements, by getting in touch; we look forward to hearing from you.

Business Services
Day Rate Operations & Maintenance Engineering Site Visits Hardware Repair
Project Based Training Solutions Sourcing Software Support
Consultancy Telephone Assistance Spares Supply Reverse Logistics & Value Recovery

 

Enterprise Infrastructure
Alcatel-Lucent Bosch Ernitec Ganz
Huawei IBM Keymile Marconi
Nokia Pelco RAD 360Vision

 

Sustainable Solutions
Legacy Systems Refurbishment Testing Craft Terminals
Spares Sourcing Repairs Maintenance Technical Support
New Telecoms Infrastructure Functional Replacements Reverse Engineering Management Systems

 

Technologies & Products
PDH Access SDH Transport IP / MPLS CCTV Cameras
Copper Cabling Microwave Radio Pseudo-wire Solar Energy
IT / Servers DWDM / CWDM Carrier Ethernet PMR / TETRA

“TESTERS” – Test Equipment to suit all deployed technologies

Customers who own infrastructure systems usually require some form of test equipment to assist with the build, operation and maintenance activities.

Given the mixture of old and new technologies now deployed, consequently the range of available test equipment options has grown considerably. And like the infrastructure systems themselves, new functionality demands and obsolescence issues also affect the associated test equipment needs and availability.

@YellowsBestLtd assists Customers by sourcing the required test equipment, supplying either modern or legacy units. Often refurbished ex-hire equipment in excellent condition and at commercially attractive prices makes sense over leasing. This ensures the continued availability of sets of the appropriate specification, which may become discontinued by the manufacturers over time.

If necessary, we can also arrange the repair of existing units, especially those that perform very specific functions that cannot easily be replicated with more recent equipment.

There follows a brief description of many of the types of test equipment available; we would be very keen to hear from you to understand your specific requirements, so please get in touch!

Calibration Checkboxes

Calibration checkboxes, or electrical checkboxes, are used for routine observations of test equipment and allow users to maintain accuracy in between official calibration procedures. Suitable for use with PAT testers and with other testers and instruments.

Calibration Checkbox
Calibration Checkbox

Component Analysers

These test the efficiency and status of components including transistors and capacitors. An essential instrument for development engineering when specific components are used in product design.

Component Analyser
Component Analyser

Earth Loop Testers

Loop impedance testers, or loop testers, verify the loop impedance of a live electrical circuit without disconnecting from the electrical supply. Most testers include non-tripping RCD technology as standard to prevent unexpected outages.

Earth Loop Tester
Earth Loop Tester

Earth Testers

These verify that electrical current paths are safely earthed. Earth spike testers, high current loop testers with earth stakes and leads are available.

Earth Tester
Earth Tester

EMF Meters

EMF meters are used for verifying the presence of electrical magnetic fields given off by electrical equipment. Ideal for use in heavy-duty electrical applications and laboratory testing conditions.

EMF Meter
EMF Meter

EVSE Testers

EVSE testers are purpose-built for the installation, testing and maintenance of electrical vehicle supply equipment and are an essential for use by electrical vehicle charging point installers, manufacturers and anyone else involved with EVSE equipment.

EVSE Tester
EVSE Tester

Insulation & Continuity Testers

A wide range of insulation and continuity testing instruments which include Megger insulation testers, insulation resistance testers, Fluke testers and insulation meters from Amprobe, DiLog, Seaward, Metrel, Martindale, Kewtech and Extech.

Insulation and Continuity Tester
Insulation and Continuity Tester

LCR Meters

LCR meters get their name from their testing capabilities – they can test inductance (L), capacitance (C) and resistance (R).

LCR Meter
LCR Meter

Multifunction Testers

Ideal for use when completing or testing an electrical installation. The huge range of MFTs include the Fluke 1600 range and Megger installation testers.

Multifunction Tester
Multifunction Tester

Optical Fibre Inspectors

Quickly find and inspect the right port. Like having a built in flash-light so you can see in dark areas and dense panels. Pause button holds the image for viewing when it’s hard to get it just right. Bright backlit display. Screw-on probe tips to support most connector types.

Optial Fibre Inspectors
Optial Fibre Inspectors

Optical Fibre Visual Fault Locators

Locates fibres, finds faults, verifies continuity and polarity. Locates visual faults including tight bends, breaks and bad connectors. Easily verifies polarity and identifies fibres. Features continuous and flashing modes.

Optical Fibre Visual Fault Locator
Optical Fibre Visual Fault Locator

Optical Power Meters

Multimode and Singlemode Power and Loss Measurements. Multiple kit configurations with light sources for single mode, multimode and PON fibre optics. Min/Max capability automates tracking of intermittent power fluctuations.

Optical Power Meter
Optical Power Meter

PAT Testers

For Portable Appliance Testing (PAT) routine safety checking of electrical equipment, including dual insulation test voltages and portable RCD lead testing, with adjustable PASS testing limits and substitute/mains powered leakage testing procedures.

PAT Tester
PAT Tester

Power Quality Analysers

These provide a comprehensive snapshot of how power is being used in your facility and verify where energy is being lost. The latest power analysers and power analysis tools include those from Fluke and Hioki.

Power Quality Analyser
Power Quality Analyser

Production Line Safety Testers

Perfect for laboratories and product design applications, the equipment in this category can be used to verify electrical safety, service equipment using multiple electrical parameters and to simulate PAT conditions.

Production Line Safety Tester
Production Line Safety Tester

Proving Units

An essential accompaniment to a voltage tester, proving units verify that the tester remains accurate both before and after testing. Both the NICEIC and NAPIT strongly recommend using these regularly when testing.

Proving Unit
Proving Unit

RCD Testers

For testing RCD trip time and overall residual current device safety/efficiency. Available are handheld RCD testers, Megger RCD testers, RCD analysers and multifunctional RCD testers which also measure loop and PSC.

RCD Tester
RCD Tester

Socket Testers

These testers are placed into a socket to assess faults with the wiring using audio/visual feedback.

Socket Tester
Socket Tester

Telecom Datacom Analysers

Ideally suiting traditional telecommunications networking requirements, typically providing testing at V.24, V.35, V.11/X.21 interfaces at rates up to 2 Mb/s.  Also a full range of BER/BLER measurements, control-circuit timing analysis with transitions diagrams and storage in text and graphic form.

Telecom Datacom Tester
Telecom Datacom Tester

Voltage Testers

Voltage Testers

These verify the presence of voltage, and allow full test of voltage levels. Instruments are available from the leading test equipment manufacturers such as Fluke, Kewtech, Martindale, Amprobe and Megger.

Voltage Tester
Voltage Tester

Legacy and New Infrastructure Spares

Most Customers’ infrastructure systems now consist of a wide range of technologies from the very old to relatively recent, having been built to serve operational requirements for a number of years. In many cases, these requirements don’t significantly change, and it therefore makes sense to keep these systems in place to maximise the use of the investment and avoid whole-scale change-outs that would be costly, disruptive and unnecessary.

@YellowsBestLtd locates hard-to-find replacement spare parts to keep legacy infrastructure in operational service that has been deemed ‘obsolete’ by the manufacturers, as well as supplying additional spares for newer systems that can be used to increase capacity or provide alternative interfaces.

Typically we provide refurbished spares, tested and working, but often it is the case that unused products from surplus stocks can be supplied. Hence for both old and new systems, we are usually able to source parts at very commercially competitive rates and with short lead-times.

Here is a selection of items that we’ve recently been helping customers procure or obtain parts for. Keen to hear what requirements you may have, so please get in touch.

Alcatel AnyMedia Access System
Bosch MIC-400, -550 and -7130 Cameras
Dialogic I-Gate 4000 System
Huawei UMG8900 Node
Marconi ST68NB Matrix and 1HAT60558ADV
Meraki MS250 switch and MR52 access point
Motorola Terayon DM6400 Network CherryPicker
Nokia Dynanet PDH Subrack and 9500 MPR ODU
Pelco S5220 Spectra CCTV Camera
Siemens SRT1 C Base Band Unit