Marconi XMP1 telecommunications

Traditional PDH / SDH transmission

The XMP1 product is multi-service access / transmission node equipment capable of PDH data rates of 8Kbps to 34Mbps and SDH STM-1 or STM-4. Originally manufactured by Marconi, the range was taken over in later years by Keymile and Bosch before being discontinued.

The system is still in service, customers include Utilities and Transport organisations, and typically deployed as a terminal multiplexer or as an ADM (Add-Drop-Mux). It can provide point to point or leased line in a corporate network for POTS, data, LAN, IDSN etc.

The building blocks of the system are the central unit which provides control and management, the SDH cards for STM-1 and STM-4 aggregation and the line units which provide uplink in the form of E1, E3 or SHDSL which can be copper or optical. 8 and 16 Slot versions were available as well as an SL (slimline) variant.

Spares and Repairs for continued long-term operation and maintenance

Whereas these products are no longer manufactured, @YellowsBestLtd is able to supply a limited amount of spare parts and/or offer repair services in order to aid customers in keeping their networks operational. There follows a non-exhaustive list of typical parts that can be supplied, we would be very pleased to receive specific requests for items that are needed.  

A205HAT00080AAB05HAT00080AABXMP (MK2) POWER SUPPLY 48/60V
AN0005905762.7026.353.00-A001PORT HDB3 (2)                          
AN0009822462.7040.405.00-A001MODUL V.11                        
AN0011478462.7040.303.00-A001ETHERNET ADAPTER                  
AN0011810662.7006.430.00-A002POWER SUPPLY 48-60V                 
A2AN00034165 Cable Clamp
A2AN00086011 CABLE CLAMP PANEL 1 HU     
A2AN00086013 PATCH PANEL V.11
A2AN00102460 CCU-CENTRAL UNIT CC WITH QD2
A2AN00102463 SUBRACK XMP1 (16) 
A2AN00109256 FRONTPANEL BLUE
A2AN00116240 Connecting Cable 2m
A2AN00214510 Connecting Cable Central Unit Protection 
A2AN00214511 Ethernet Cable (5m)
A2AN0022815 DSK MODULAR
A2AN00274356 Input/Output Alarm Cable(2 O/P,3 I/P)
A2AN00276278 Connecting Cable 6m (Port HDB3) coax 
A2AN00276281 Connecting Cable 20m (Port HDB2) coax
A2AN0034165 Cable Clamp
A2AN00702802 Mounting element
A205HAN00499AAC XMP1-SL CROSS CONNECT
XMP1 spares

@YellowsBestLtd our mission is in “Keeping Customers Operational”. We’re always keen to enhance our range of #business services, increase the #enterprise infrastructure we support and expand our mix of #sustainable solutions we offer for supply and maintenance of new and legacy #technologies and products for our customers. 

Please help us understand your management services or solutions requirements, whether you’re implementing new systems or maintaining existing infrastructure networks to serve your operational business needs. 

#business services new legacy solutions sourcing #enterprise infrastructure #sustainable spares #technologies products @YellowsBestLtd

Spares

Support for new and legacy systems

Our mission is with “Keeping Customers Operational”. One of the ways we accomplish this aim is by supplying spare parts for infrastructure systems, which are typically established, long-standing and therefore proven and fit-for-purpose. It makes sense to maintain and extend the life of these systems, as wholesale replacements will be costly and disruptive. This is particularly applicable when the service requirements have not changed, so functionality upgrades are not necessary.

Sometimes new product spares can be sourced, either manufactured to order, or from surplus stocks. Often when product ranges have been discontinued, the items can still be supplied as refurbished, working and tested elements, having been extracted from decommissioned networks.

Requirements for spare parts vary across a wide range of technologies and are usually sourced to support ‘legacy’ networks, but we also receive requests for new products to supplement the scope and capacity of more recently deployed systems.

@Yellowsbestltd would be keen to hear from you should you have any spares requirements. We have various elements in stock, and anything we don’t have immediately available we can usually source very quickly. Please get in touch to let us know what you need.

By example, there follows a list of a few recent requests we have been able to assist with. We look forward to hearing from you with any feedback you may have.

Recent spares requests

Part NumberDescription
D-21740Euro Connectors 3×7
D-21470 – Euro Connectors 3×7
Part NumberDescription
TU21206Subs/Subs

Part NumberDescription
T37885.02Ring Generator + DC/DC converter
T37885.02 – Ring Generator + DC/DC converter
Part NumberDescription
CC24101DN2 IU2
CC24101 – DN2 IU2
Part NumberDescription
ADR155cA155 BLK STM1/4 21E1 19″/ETSI CORE CHASSIS
Sagem ADR155c

Sagem ADR SDH family

‘Legacy’ telecoms history

The Sagem ADR product range was an SDH Add-drop Multiplexer (ADM) product family designed as a flexible platform for Metro Access and Metro Core, backhauling, microwave radio and Utilities infrastructure networks. 

ADR155c

The family included ADR155c and ADR622, STM-1/STM-4 ADM, and ADR2500 ‘eXtra’ and ADR10000, STM-16/STM-64 multi-service NG SDH. This range was managed by the IONOS Network Management System (NMS) which also managed Sagem Primary Multiplexers, PDH and SDH microwave radio and DWDM systems.

ADR622

 The ADR family was deployed worldwide with more than 60,000 units over 5 years.

Comprehensive Functionality

ADR2500 ‘eXtra’

The ADR platform offers a large variety of interfaces from E1 and E3, Fast Ethernet and Gigabit Ethernet, enabling the provision of a wide range of end Customer services. Transmission protection for guaranteed QoS is provided with SNCP, MSP, MS-SPRing as well as common unit and tributary protection.

The STM-16 network units can be used for multi STM-1 or STM-4 and local-cross connect functionality thanks to a fully non-blocking switch matrix.  

The modular and flexible housing provided by the ADR155c (2U), ADR622 (6U) and ADR2500 ‘eXtra’ (14U) 19” and ETSI subracks provide a flexible mix of office, street cabinet and equipment room deployment.

ADR10000

Continuing to provide operational service

The ADR family of SDH products continues to provide operational service with various global Operator, Utilities and Transport companies. 

@YellowsBestLtd supports requirements to maintain these networks by supplying various spare part items from refurbished and surplus stocks in perfect working order. 

There follows a list of the main elements that are typically provided, though other items can be provided. Please let us know of any specific requirements you may have. We look forward to being of assistance.

SAGEM ADR Spares List

Part CodeUnit typeDescription
AM101333 / 251 119 665ADR155cA155 BLK STM1/4 21E1 19″/ETSI CORE CHASSIS
AM101330 / 251 137 402ADR 21E120ADR BLK BNC 21E1/120 ITFE CARD
AM101328 / 251 137 366ADR IC1.1A155 BLK FC/PC IC1.1 OPTIC STM1 CARD
251 137 410ADR LAN1A155 BLK ADRLAN 10/100BT ETH ITFE CARD
AM101360 / 251 131 182ADR FANFAN MODULE
AM101670 / 251 137 431ADR EREA155 BLK BNC ELEC STM1 ITFE CARD

Optical Teleprotection Signalling (TPSO) Equipment (C37.94)

Electrical power systems protection

Teleprotection for power systems protection has been deployed by utility companies for many years. It’s purpose is to monitor the condition of the Electricity Grid, isolate faults, disconnecting faulty parts from the rest of the network and thereby prevent damage to critical parts of the power infrastructure.

Teleprotection is a physical interface between the telecommunications equipment and the electrical grid protection relays. When a fault occurs, the protection system switches on circuit breakers or reclosers to avoid a fault rippling through the network. Also, in the event of an outage, teleprotection helps restart power to a part of the grid.

Early teleprotection systems used voice-frequency signalling technologies. These were replaced by digital electrical Tele-Protection Signalling (TPS) equipment using 4 or 8 command channels encoded into a 64kbit/s standard digital data channel, in accordance with the ITU-T G.703 recommendations. This brought dependability and interoperability of systems, meaning that dedicated channels were no longer required as any standard digital transmission network could be used, separate from the power system.

This was later enhanced by the development of Tele-Protection Systems with Optical (TPSO) interfaces, which allowed the direct fibre connection between the teleprotection device and the primary multiplexer. 

The IEEE C37.94 standard for TPSO interfaces

The IEEE C37.94 standard defines an optical fibre interface for use between teleprotection systems and digital multiplexer equipment, operating at a data rate of nx64kbit/s. 

This allows the interconnection of different vendors teleprotection equipment with different vendors multiplexer equipment, without any restriction on the content of the nx64kbps data, using up to 2km of 50μm or 62.5μm multimode (or up to 20 km of 9μm single-mode) optical fibre.

Critical Systems deployment 

Teleprotection systems are typically installed in high-voltage transmission grids where distances are usually greater than in distribution grids and play a critical role in preventing instability in the grid and damage to expensive substation equipment.

Teleprotection systems monitor conditions on transmission lines and coordinate tripping of the transmission lines to quickly isolate faults. 

A teleprotection system usually has two components: a protection relay, which executes the actual switching; and the teleprotection equipment itself, which is the interface to the mission-critical communications network. 

Typical Teleprotection Systems Network

To ensure that the power systems are properly protected, real-time exchange of status information messages and commands between teleprotection equipment must be reliably transferred with tightly-controlled latency over a deterministic mission-critical communications network, traditionally composed of TDM multiplexers and optical PDH or SDH equipment. 

Nokia ‘Dynanet’ TPSO 24204

An example of a vendor’s multiplexer is the Nokia ‘Dynanet’ equipment family. This utilises the TPSO 24204 interface unit for connecting the teleprotection devices directly to the primary multiplexer. This provides four IEEE C37.94 standard interfaces, with nx64kbit/s optical data channels (where n is 1 to 12).

TPSO – 24204

Because of the direct connection, there is no need for a separate converter to change the optical connection to electrical. This eliminates electrical interference and data corruption caused by disturbances from the high voltage power line.

Your operational systems requirements

Let us know how we can assist you to keep your new and legacy systems operational with technical support, repair services and equipment spares. We look forward to hearing from you.

New Year, New Stock! ‘Dynanet’ Spares

Nokia ‘Dynanet’ PDH Transmission products

For many years, the ‘Dynanet’ family of PDH Transmission telecoms products have well served Public Operator and Private Network Customers across the Telecoms, Utilities, Transport and Public Safety markets with high availability mission critical infrastructure, and indeed some networks are continuing to provide good operational service.

They were first introduced by Nokia over 20 years ago, and were continued in recent years by DNWP. Production of the majority of the product range was ceased in 2019. 

Spare parts for continued operational service

@YellowsBestLtd satisfies world-wide customer product sourcing requirements for current and ‘legacy’ equipment technologies from a wide range of Original Equipment Manufacturers (O.E.M.s).

For the ‘Dynanet’ range, we have recently obtained of a number of additional  refurbished and surplus equipment items. Hence, for those customers continuing to maintain their networks, there now exists the opportunity to increase stocks of spare parts to take advantage of the current availability.

Stocklist of items for immediate supply

Here is a list of the main items currently in stock, though there may be a few additional parts that can be supplied.  Hence, please check and if you do have any requirements, please let us know. We look forward to hearing from you.

Part NumberDescription
CC 24002DB2 2×2 Mb/s Branching Unit (B2), 75ohm
B2
DB2 B2 – CC 24002
Part NumberDescription
CC 24011DB2 2 Mb/s Switching Unit (X2), 75ohm
X2
DB2 X2 – CC 24011
Part NumberDescription
CC 24101DN2 2×2 Mb/s Interface Unit (IU2), 75ohm
IU2
DN2 IU2 – CC 24101
Part NumberDescription
CC 24111DN2 Control Unit (CU), 75 ohm
CG 24170DN2 Bus Power Unit (BPU)
CG 24171DN2 Extended Bus Power Unit (EBPU)
CU 24013Data Interface Unit (DIU) 2M, nx64k: G.703/704, 75ohm
nx64k
DIU nx64k – CU 24013
Part NumberDescription
D-21470Euro Connector, 3×7
3x7
Connector 3×7 – D-21470
Part NumberDescription
D-24204Optical Teleprotection Interface Unit, C37.94
C37.94
C37.94 – D-21470
Part NumberDescription
T31094.01DCN Adapter C4.0
DCNA
DCN Adapter C4.0 – T31094.01
Part NumberDescription
T37870.01NDM 19in 17-slot Subrack
Subrack
19in Subrack – T37870.01
Part NumberDescription
T37871.01NDM DN2 19in 17-Slot Subrack
T37882.02NDM DC Unit (NDUe)
NDUe
NDUe – T37882.02
Part NumberDescription
T37885.01NDM Ring Generator
Ring Generator – T37885.01
Part NumberDescription
T37885.02NDM Ring Generator + DC/DC converter
Ring Generator – T37885.02
Part NumberDescription
T37889.01NDM Backup Unit (NBU)
NDM Backup Unit – T37889.01
Part NumberDescription
T65580.01ACL2i PF GEN Line Terminal Card
ACL2i PF GEN – T65580
Part NumberDescription
TA 21513Optical Line Terminal Repeater (DF2-8), 1300 nm LED MM/SM
TA 21516Optical Line Terminal Repeater (DF2-8), 1300 nm LASER SM
TA 21518Optical Line Terminal Repeater (DF2-8), 1300 nm LASER LP
DF2-8 – TA 21518
Part NumberDescription
TC 21101DM2 Multiplexing Unit, 75ohm
DM2
DM2 – TC 21101
Part NumberDescription
TC 21301DM8 Multiplex Equipment, 75ohm
TC 21705Supervisory Substation
TC 21710.01TMS Adapter
TU 21122.5Data Interface Unit (DIU) 48..64k, V.11, 10ch
TU 21124Data Interface Unit (DIU) nx64k, V.11/V.35/X.21, 2ch
TU 21124.05Data Interface Unit (DIU) nx64k, V.11/V.35/X.21, sync
TU 21125Data Interface Unit (DIU) 48..64k with sync, X.21
DIU X.21 – TU 21125
Part NumberDescription
TU 21205Channel Unit SUB/SUB
TU 21206Channel Unit SUB/SUB
Channel Unit Subscriber / Subscriber – TU 21206
Part NumberDescription
TU 21215Channel Unit SUB/EXCH
TU 21216Channel Unit SUB/EXCH
Channel Unit Subscriber / Exchange – TU 21216
Part NumberDescription
TU 21234.20Channel Unit E&M/VF-P, 10 ch, 20 E&M ch
TU 21236.10Channel Unit 8ch E&M/uP: 1xUKe&m/VF
VF E&M
VF E&M – TU 21236.10
Part NumberDescription
TU 21255.01Channel Switch, 4 port

Maintenance of Legacy networks – Spares, Connectors and Cables

Continued use of Legacy Telecoms  – Nokia PDH ‘Dynanet’

Public Operator and Private Network Customers across the Telecoms, Utilities, Transport and Public Safety markets maintain ‘legacy’ infrastructure for mission critical applications, which continue to deliver good operational service with high availability. 

Typical products utilised are those from the ‘Dynanet’ family of PDH Transmission telecoms products, which were first introduced by Nokia over 20 years ago, and were continued in recent years by DNWP. Production of the majority of the product range was ceased in 2019. 

In order to maintain these systems and networks, it’s still possible to supply spares from surplus stocks and refurbished items to keep networks operational. 

Don’t forget the Connectors and Cables!

One challenge for the continued use of existing infrastructure, particularly when installing replacement parts, is sourcing the appropriate specialised and often propriety connectors for cabling of interfaces and management connections.  

Regarding ‘Dynanet’, fortunately some products can still be produced, notably the Euro / SMB connectors, along with the DCN Adapter C4.0, related management software products and other items such as the TPS64 and NDUE. Listed here are a few of those currently available new:

Part NumberDescription
21475
SMB Connector for RD179 cable
21472
Euro Connector 3×32
21470
Euro Connector 3×7
Euro Connector 3×7 – 21470
Part NumberDescription
24201TPS Control Unit
24202TPS Channel Unit
T37882.02NDM DC Unit, enhanced (NDUE)
T31094.01DCN Adapter C4.0
DCNA
DCN Adapter C4.0 – T31094.01

We are able additionally produce a wide range of cable products to suit most connection requirements, utilising our UK-based manufacturing partner.  Bespoke cable assemblies, control boxes, harnesses, wiring looms, panels, fibre optic products are some of the network solutions available. 

@YellowsBestLtd satisfies world-wide customer product sourcing requirements for current and ‘legacy’ equipment technologies from a wide range of Original Equipment Manufacturers (O.E.M.s), surplus stocks and refurbished items.

Hence, please check and if you do have any requirements, please let us know. We look forward to hearing from you.

Remaining stocks of Nokia ‘Dynanet’ spares – Update

Surplus and Refurbished Items for continued operational service

Many Customers have ‘legacy’ telecommunications networks which are continuing to provide good operational service. Particularly where functional requirements have not changed, it makes sense to avoid or delay costly and time-consuming change-out replacement projects, by obtaining spare parts.

@YellowsBestLtd satisfies world-wide customer product sourcing requirements for current and ‘legacy’ equipment technologies from a wide range of Original Equipment Manufacturers (O.E.M.s).

Stocklist of Nokia ‘Dynanet’ Spare Parts – Available for immediate supply

For the ‘Dynanet’ family of PDH Transmission telecoms products, which has provided 20+ years of service, we still have a few spare units are in stock and available for immediate supply. These items have been mostly retrieved from operational service during Customers’ decommissioning projects, and have been refurbished, tested and are warranted for working operation.

Given that production of the majority of the product range was ceased in 2019 or before, it is recommended to consider purchasing spare parts whilst there is still availability.

Here is a list of the main items currently in stock, though there may be a few additional parts that can be supplied.  Hence, please check and if you do have any requirements, please let us know. We look forward to hearing from you.

Part NumberDescription
CC 24002DB2 2×2 Mb/s Branching Unit (B2), 75ohm
CC 24011DB2 2 Mb/s Switching Unit (X2), 75ohm
CC 24101DN2 2×2 Mb/s Interface Unit (IU2), 75ohm
CC 24111DN2 Control Unit (CU), 75 ohm
CF 24186DN2 19in Subrack
CF 24186.09DN2 19in Subrack, grey-L91 EMC
CG 24170DN2 Bus Power Unit (BPU)
CG 24171DN2 Extended Bus Power Unit (EBPU)
CU 24013Data Interface Unit (DIU) 2M, nx64k: G.703/704, 75ohm
D-21470Euro Connector, 3×7
D-24204Optical Teleprotection Interface Unit, C37.94
T30506.0917-slot DYNANET Subrack
T30851.02Subrack Power Adapter (SPA)
T31094.01DCN Adapter C4.0
DCNA
DCN Adapter C4.0 – T31094.01
Part NumberDescription
T37870.01NDM 19in 17-slot Subrack
T37871.01NDM DN2 19in 17-Slot Subrack
T37882.01NDM DC Unit (NDU)
T37882.02NDM DC Unit (NDUe)
T37885.01NDM Ring Generator
Ring Generator – T37885.01
Part NumberDescription
T37885.02NDM Ring Generator + DC/DC converter
Ring Generator – T37885.02
Part NumberDescription
T37889.01NDM Backup Unit (NBU)
NDM Backup Unit – T37889.01
Part NumberDescription
T65520.01ACL2 RM DC Power Gen
T65580.01ACL2i PF GEN Line Terminal Card
ACL2i PF GEN – T65580
Part NumberDescription
TA 21513Optical Line Terminal Repeater (DF2-8), 1300 nm LED MM/SM
TA 21516Optical Line Terminal Repeater (DF2-8), 1300 nm LASER SM
TA 21518Optical Line Terminal Repeater (DF2-8), 1300 nm LASER LP
DF2-8 – TA 21518
Part NumberDescription
TC 21101DM2 Multiplexing Unit, 75ohm
TC 21301DM8 Multiplex Equipment, 75ohm
TC 21705Supervisory Substation
TC 21710.01TMS Adapter
TG 21261Ring Generator 25HZ 15W
TU 21122.5Data Interface Unit (DIU) 48..64k, V.11, 10ch
TU 21124Data Interface Unit (DIU) nx64k, V.11/V.35/X.21, 2ch
TU 21124.05Data Interface Unit (DIU) nx64k, V.11/V.35/X.21, sync
TU 21125Data Interface Unit (DIU) 48..64k with sync, X.21
DIU X.21 – TU 21125
Part NumberDescription
TU 21205Channel Unit SUB/SUB
TU 21206Channel Unit SUB/SUB
Channel Unit Subscriber / Subscriber – TU 21206
Part NumberDescription
TU 21215Channel Unit SUB/EXCH
TU 21216Channel Unit SUB/EXCH
Channel Unit Subscriber / Exchange – TU 21216
Part NumberDescription
TU 21234.20Channel Unit E&M/VF-P, 10 ch, 20 E&M ch
TU 21236.10Channel Unit 8ch E&M/uP: 2xe&m/vf
TU 21255.01Channel Switch, 4 port
TV 21640.08Power Interface Adapter DC

Legacy Telecoms Spares – Nokia ‘Dynanet’ Update

Nokia DCN Adapter – Management & Other products

The ‘Dynanet’ family of PDH Transmission telecoms products were first introduced by Nokia over 20 years ago, and were continued in recent years by DNWP. These have well served Public Operator and Private Network Customers across the Telecoms, Utilities, Transport and Public Safety markets with high availability mission critical infrastructure, and indeed some networks are continuing to provide good operational service. 

Production of the majority of the product range was ceased in 2019. However, some products remain available to order, notably the DCN Adapter C4.0, related management software products and other items such as the TPS64, NDUE and Euro / SMB connectors.

Nokia DCN Adapter

Continued Supply of Spare Parts – Surplus and Refurbished Items

@YellowsBestLtd satisfies world-wide customer product sourcing requirements for current and ‘legacy’ equipment technologies from a wide range of Original Equipment Manufacturers (O.E.M.s).

For the ‘Dynanet’ range, we should be able to continue to supply refurbished and surplus equipment for as long as required, but the effect of the discontinuation of production is squeezing the availability of remaining stocks, with a consequential impact on pricing.

Hence, for those customers continuing to maintain their networks, it is recommended to consider purchasing spare parts whilst there is still availability.  Please get in touch to advise what you need!

Nokia ‘Dynanet’ PDH Telecoms Spares

Continued Supply of Spare Parts – Surplus and Refurbished Items

@YellowsBestLtd satisfies customer product sourcing requirements for current and ‘legacy’ equipment technologies.

Despite the recent ‘rampdown’ announcement by DNWP for the ‘Dynanet’ range, we should be able to continue to supply refurbished and surplus equipment for as long as required, but the likely effect of the discontinuation of production will be to squeeze the availability of remaining stocks, with a consequential impact on pricing.

Hence, it is recommended that if there is anything that might be needed, it would be best to consider purchasing it in good time to ensure availability of items and best prices.  

Here is a list of the main items immediately available from current stocks, though there may be a few additional parts that can be supplied. Hence, please check and if you do have any requirements, please let us know. We look forward to hearing from you.

Part NumberDescription
24204TPSO H/W Module
CC 24002DB2 Branching Unit, B2 2×2 Mb/s 75 ohm
CC 24011DB2 2 Mb/s Switching Unit, X2 75 ohm
CC 24101DN2 Interface Unit (IU2) 2×2 Mb/s 75 ohm
CC 24111DN2 Control Unit (CU) 75 ohm
CF 24186DN2 19″ Subrack
CF 24186.09DN2 Subrack 19″, grey-L91 EMC
CG 24170DN2 Bus Power Unit (BPU)
CG 24171Extended DN2 Bus Power Unit (EBPU)
CU 24013Data Interface Unit (DIU) 2M, nx64k: G.703/704, 75 ohm
T30506.0917-slot DYNANET Subrack
T30851.02Subrack Power Adapter (SPA)
T37870.01NDM ACM2 19in 17-slot subrack
T37871.01NDM DN2 19″ 17-Slot Subrack
T37882.01NDM DC Unit (NDUe)
T37882.02NDM DC Unit (NDUe)
T37885.01NDM Ring Generator
Ring Generator – T37885.01
Part NumberDescription
T37889.01NDM Backup Unit (NBU)
NDM Backup Unit – T37889.01
Part NumberDescription
T65520.01ACL2 RM DC Power Gen
T65580.01ACL2i PF GEN Line Terminal Card
ACL2i PF GEN – T65580
Part NumberDescription
TA 21513Optical Line Terminal Repeater 2-8 M, 1300 nm LED MM/SM
TA 21516Optical Line Terminal Repeater 2-8 M, 1300 nm LASER SM
TC 21101DM34 Mux Card
TC 21301DM8 Multiplex Equipment, 75 ohm
TC 21705Supervisory Substation
TC 21710.01TMS Adapter
TG 21261Ring Generator 25HZ 15W
TU 21122.5Data Interface Unit (DIU) 48..64k V.11 10ch
TU 21124Data Interface Unit (DIU) NX64k V.11/V.35/X.21 2CH
TU 21124.05Data Interface Unit (DIU)
TU 21125Data Interface Unit (DIU) 48..64k with sync, X.21
DIU X.21 – TU 21125
Part NumberDescription
TU 21205Channel Unit SUB/SUB
TU 21206Channel Unit SUB/SUB
Channel Unit Subscriber / Subscriber – TU 21206
Part NumberDescription
TU 21215Channel Unit SUB/EXCH
TU 21216Channel Unit SUB/EXCH
Channel Unit Subscriber / Exchange – TU 21216
Part NumberDescription
TU 21234.20Channel Unit E&M/VF-P, 10 CH, 20 E&M CH
TU 21236.10Channel Unit (CU) 8ch E&M/uP: 2xe&m/vf
TU 21255.01Channel Switch, 4 PORT
TV 21640.08Power Interface Adapter DC

‘Dynanet’ Telecoms – ‘Rampdown’ notice

Phased Discontinuation of Production – 31st May 2019 – 31st January 2020

The production of the ‘Dynanet’ family of PDH Transmission telecoms products, first introduced by Nokia over 20 years ago, and continued in recent years by DNWP, is finally being ended.

This product range has well served Public Operator and Private Network Customers across the Telecoms, Utilities, Transport and Public Safety markets with high availability mission critical infrastructure, and indeed some networks are continuing to provide good operational service. 

Essentially almost all the old equipment items, with a very few exceptions such as the TPS64, are being completely discontinued in a phased way according to these milestones, which have already commended:

31st May 2019 – DM8 Multiplexers, DF2-8 Optical Terminals, RPSA

31st October 2019 – DM2 Multiplexers, Subs/Exch & VF Cards, DN2 IU2, Service Terminals, V.28/V.11 DIU

31st January 2020 – DB2, DN2 CU & BPU, G.703 & V.110, DIU, Ethernet I/F, Ring Gen, NDM 19” Subrack, NDA

@YellowsBestLtd satisfies customer product sourcing requirements for current and ‘legacy’ equipment technologies.

Should you wish to read the full ‘ramp-down’ notice and know more about obtaining equipment before it is no longer available, then please get in touch.